PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00A-10820-122
00A-10820-122 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 2.525 INCHES NOMINAL IN, outside_diameter: 2.825 INCHES NOMINAL IN, material_thickness: 0.145 INCHES NOMINAL IN, outer_edge_thickness: 0.010 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-744-1328, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00A-10820-122
NSN: 5330-00-744-1328
FSC: 5330
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter2.525 INCHES NOMINAL IN
outside_diameter2.825 INCHES NOMINAL IN
material_thickness0.145 INCHES NOMINAL IN
outer_edge_thickness0.010 INCHES NOMINAL IN
cross-sectional_shape_styleOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
NSN5330-00-744-1328
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00A-10820-122 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RING STYLE: CONCENTRIC
•
MATERIAL: UNABLE TO DECODE
•
OUTER EDGE THICKNESS: 0.010 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.825 INCHES NOMINAL IN
•
INSIDE DIAMETER: 2.525 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.145 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
TECHNICAL CHARACTERISTICS (FLIS)
RING STYLECONCENTRIC
MATERIALUNABLE TO DECODE
OUTER EDGE THICKNESS0.010 INCHES NOMINAL IN
OUTSIDE DIAMETER2.825 INCHES NOMINAL IN
INSIDE DIAMETER2.525 INCHES NOMINAL IN
MATERIAL THICKNESS0.145 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
20-133Interchangeable
interchangeable cross-reference
interchangeable
18730Interchangeable
interchangeable cross-reference
interchangeable
CC-5086 PART NO 66Interchangeable
interchangeable cross-reference
interchangeable
2090005050740Interchangeable
interchangeable cross-reference
interchangeable
142-128Interchangeable
interchangeable cross-reference
interchangeable
08621-00023Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00A-10820-122?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00A-10820-122?
00A-10820-122 is a RING,WIPER.
What parts can replace 00A-10820-122?
There are 17 known substitutes for 00A-10820-122: 20-133, 18730, CC-5086 PART NO 66 and 14 more. Substitute compatibility should be verified for your specific system.
Is 00A-10820-122 still available?
00A-10820-122 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00A-10820-122

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026