009646 — BEARING,BALL,DUPLEX

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

009646: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC RETAINER, bore_diameter: 1.0622 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN, overall_width: 0.3748 INCHES MINIMUM AND 0.3752 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, special_features: 10 LB MAX AXIAL PRELOAD RATING,0.0625 IN. RADIUS ON EXTERNAL CORNERS,1 PIECE OUTER RING,2 PIECE INNER RING LBS.

This part is cataloged in the U.S. Government catalog under NSN 3110-01-035-9803, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

009646

NSN: 3110-01-035-9803
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)

SPECIFICATIONS

material	PLASTIC PHENOLIC RETAINER
bore_diameter	1.0622 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
overall_width	0.3748 INCHES MINIMUM AND 0.3752 INCHES MAXIMUM IN
load_direction	RADIAL
surface_finish	GROUND
shield_quantity	2
special_features	10 LB MAX AXIAL PRELOAD RATING,0.0625 IN. RADIUS ON EXTERNAL CORNERS,1 PIECE OUTER RING,2 PIECE INNER RING LBS
bearing_preload_rating	5.0 POUNDS NOMINAL LBS
overall_outside_diameter	1.4996 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
bearing_preload_designation	LIGHT
retainer_fabrication_method	MACHINED
material_document_and_classification	UNABLE TO DECODE
NSN	3110-01-035-9803

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: MACHINED

•

BEARING PRELOAD RATING: 5.0 POUNDS NOMINAL LBS

•

SURFACE FINISH: GROUND

•

BEARING PRELOAD DESIGNATION: LIGHT

•

SHIELD QUANTITY: 2

•

MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE

•

OVERALL OUTSIDE DIAMETER: 1.4996 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	MACHINED
BEARING PRELOAD RATING	5.0 POUNDS NOMINAL LBS
SURFACE FINISH	GROUND
BEARING PRELOAD DESIGNATION	LIGHT
SHIELD QUANTITY	2
MATERIAL DOCUMENT AND CLASSIFICATION	UNABLE TO DECODE
OVERALL WIDTH	0.3748 INCHES MINIMUM AND 0.3752 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER	1.4996 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
LOAD DIRECTION	RADIAL
SPECIAL FEATURES	10 LB MAX AXIAL PRELOAD RATING,0.0625 IN. RADIUS ON EXTERNAL CORNERS,1 PIECE OUTER RING,2 PIECE INNER RING LBS

OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722

SUBSTITUTES & CROSS-REFERENCES 1

630B009646Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 009646?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 009646?

009646 is a BEARING,BALL,DUPLEX.

What parts can replace 009646?

There is 1 known substitute for 009646: 630B009646. Substitute compatibility should be verified for your specific system.

What is the NSN for 009646?

009646 is cataloged in the U.S. Government catalog under NSN 3110-01-035-9803. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

009646 — BEARING,BALL,DUPLEX

Request a Quote — 009646