PartsTable
Technical Data Sheet
00956 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TELETYPEWRITER SUBASSEMBLY is a the manufacturer industrial component. Key specifications include end_item_identification: 5815-00-790-8777,TELETYPEWRITER SET,AN/TGC-29(V)1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-382-7759, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 00956
NSN: 5330-00-382-7759
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
end_item_identification5815-00-790-8777,TELETYPEWRITER SET,AN/TGC-29(V)1
NSN5330-00-382-7759
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00956 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
FABRICATION METHOD: SOLID
CROSS-SECTIONAL SHAPE STYLE: U SHAPE
STYLE DESIGNATOR: CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-15624,CL 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MINOR WIDTH: 0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN
CONSTRUCTION: SOLID
MINOR HEIGHT: 0.561 INCHES MINIMUM AND 0.581 INCHES MAXIMUM IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
FABRICATION METHODSOLID
CROSS-SECTIONAL SHAPE STYLEU SHAPE
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-15624,CL 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MINOR WIDTH0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN
CONSTRUCTIONSOLID
MINOR HEIGHT0.561 INCHES MINIMUM AND 0.581 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
CROSS-SECTIONAL HEIGHT0.655 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.249 INCHES MINIMUM AND 0.269 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
6002-55Interchangeable
interchangeable cross-reference
interchangeable
00956Interchangeable
interchangeable cross-reference
interchangeable
0956Interchangeable
interchangeable cross-reference
interchangeable
603-4123-189199PC379Interchangeable
Same NIIN cross-reference
interchangeable
2141712 PC 3Interchangeable
Same NIIN cross-reference
interchangeable
SS(N)637-123-2141712 PC 3Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00956?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00956?
00956 is a TELETYPEWRITER SUBASSEMBLY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 00956?
There are 12 known substitutes for 00956: 6002-55, 00956, 0956 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00956?
00956 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-382-7759. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00956