PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00935749
00935749 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include overall_width: 0.750 INCHES NOMINAL IN, style_designator: TWO PIECE, material_diameter: 0.380 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE BAND, loop_inside_diameter: 3.000 INCHES NOMINAL IN, surface_treatment_document_and_classification: QQ-P-416,TYPE2 FED SPEC SINGLE TREATMENT RESPONSE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-152-0457, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00935749
NSN: 5340-00-152-0457
FSC: 5340
CAGE: 22852 — SPALLA INC (USA)
SPECIFICATIONS
overall_width0.750 INCHES NOMINAL IN
style_designatorTWO PIECE
material_diameter0.380 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE BAND
loop_inside_diameter3.000 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416,TYPE2 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-00-152-0457
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00935749 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM AND CHROMATE BAND
•
LOOP INSIDE DIAMETER: 3.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: TWO PIECE
•
MATERIAL DIAMETER: 0.380 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE2 FED SPEC SINGLE TREATMENT RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM AND CHROMATE BAND
LOOP INSIDE DIAMETER3.000 INCHES NOMINAL IN
STYLE DESIGNATORTWO PIECE
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL DIAMETER0.380 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE2 FED SPEC SINGLE TREATMENT RESPONSE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
2310320Interchangeable
interchangeable cross-reference
interchangeable
2052874Interchangeable
interchangeable cross-reference
interchangeable
34641Interchangeable
interchangeable cross-reference
interchangeable
DH34641Interchangeable
interchangeable cross-reference
interchangeable
A261FInterchangeable
interchangeable cross-reference
interchangeable
59A10C289Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00935749?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00935749?
00935749 is a CLAMP,LOOP.
What parts can replace 00935749?
There are 14 known substitutes for 00935749: 2310320, 2052874, 34641 and 11 more. Substitute compatibility should be verified for your specific system.
Is 00935749 still available?
00935749 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00935749

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026