PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00922
00922 ✓ Verified by PartsTable
Displex · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

<b>Screen protection made from extremely tempered real glass</b><br>The DISPLEX safety glass screen protector made from tempered real glass, provides for crystal-clear and extremely robust protection against scratches and impact. Of course crystal clear and with a perfect touch! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-405-9178, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00922
NSN: 5330-00-405-9178
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
hole_diameter0.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.812 INCHES NOMINAL IN
aperture_width1.562 INCHES NOMINAL IN
overall_length2.656 INCHES NOMINAL IN
aperture_length2.406 INCHES NOMINAL IN
outside_corner_radius0.156 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. F326128-6 MIL SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.219 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.219 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-405-9178
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00922 MFR: Displex ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. F326128-6 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.219 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.156 INCHES NOMINAL IN
•
APERTURE LENGTH: 2.406 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.219 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. F326128-6 MIL SPEC ALL MATERIAL RESPONSES OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.219 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.156 INCHES NOMINAL IN
OVERALL LENGTH2.656 INCHES NOMINAL IN
APERTURE LENGTH2.406 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.219 INCHES NOMINAL IN
APERTURE WIDTH1.562 INCHES NOMINAL IN
OVERALL WIDTH1.812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
T6355978PC1Interchangeable
interchangeable cross-reference
interchangeable
424401PC6Interchangeable
interchangeable cross-reference
interchangeable
4521Interchangeable
interchangeable cross-reference
interchangeable
HB6018Interchangeable
interchangeable cross-reference
interchangeable
3-6018Interchangeable
interchangeable cross-reference
interchangeable
32A239TVIT10000HM604SLDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00922?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00922?
00922 is a GASKET manufactured by Displex.
What parts can replace 00922?
There are 18 known substitutes for 00922: T6355978PC1, 424401PC6, 4521 and 15 more. Substitute compatibility should be verified for your specific system.
Is 00922 still available?
00922 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00922

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026