PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0087004-1
0087004-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.910 INCHES NOMINAL IN, overall_length: 1.380 INCHES NOMINAL IN, aperture_diameter: 0.570 INCHES NOMINAL IN, fsc_application_data: JET ENGINE ACFT, outside_corner_radius: 0.120 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-739-1862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0087004-1
NSN: 5330-00-739-1862
FSC: 5330
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
hole_diameter0.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.910 INCHES NOMINAL IN
overall_length1.380 INCHES NOMINAL IN
aperture_diameter0.570 INCHES NOMINAL IN
fsc_application_dataJET ENGINE ACFT
outside_corner_radius0.120 INCHES NOMINAL IN
cross-sectional_thickness0.045 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
center_to_center_distance_between_bolt_holes_along_width0.560 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-739-1862
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0087004-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.560 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.120 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.045 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE DIAMETER: 0.570 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.560 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.120 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.045 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER0.570 INCHES NOMINAL IN
OVERALL LENGTH1.380 INCHES NOMINAL IN
OVERALL WIDTH0.910 INCHES NOMINAL IN
FSC APPLICATION DATAJET ENGINE ACFT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
RRC00281Interchangeable
interchangeable cross-reference
interchangeable
540028Interchangeable
interchangeable cross-reference
interchangeable
08C02490000Interchangeable
interchangeable cross-reference
interchangeable
B5-45-2610Interchangeable
interchangeable cross-reference
interchangeable
7826592-4Interchangeable
interchangeable cross-reference
interchangeable
BAC12X1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0087004-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0087004-1?
0087004-1 is a GASKET.
What parts can replace 0087004-1?
There are 11 known substitutes for 0087004-1: RRC00281, 540028, 08C02490000 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0087004-1?
0087004-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-739-1862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0087004-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026