PartsTable
Technical Data Sheet
PartsTable / MRO / 008-010912
008-010912 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The 008-010912 is a the manufacturer industrial component. Key specifications include material: PLASTIC DIALLYL PHTHALATE, overall_width: 0.370 INCHES NOMINAL IN, overall_height: 0.087 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN, overall_length: 0.370 INCHES NOMINAL IN, specification/standard_data: 58536-A-A-55485/5 GOVERNMENT SPECIFICATION, unthreaded_mounting_hole_diameter: 0.025 INCHES NOMINAL SINGLE MOUNTING FACILITY IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-044-5781, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 008-010912
NSN: 5999-01-044-5781
FSC: 5999
CAGE: 26916 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP DIV MULTIPLE (USA)
SPECIFICATIONS
materialPLASTIC DIALLYL PHTHALATE
overall_width0.370 INCHES NOMINAL IN
overall_height0.087 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN
overall_length0.370 INCHES NOMINAL IN
specification/standard_data58536-A-A-55485/5 GOVERNMENT SPECIFICATION
unthreaded_mounting_hole_diameter0.025 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
mounting_facility_type_and_quantity10 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
material_document_and_classificationMIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE
NSN5999-01-044-5781
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 008-010912 MFR 008-010912
KEY FEATURES
•
TEST DATA DOCUMENT: 58536-A-A-55485 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MATERIAL: PLASTIC DIALLYL PHTHALATE
•
UNTHREADED MOUNTING HOLE DIAMETER: 0.025 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
•
MOUNTING FACILITY TYPE AND QUANTITY: 10 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
•
SPECIFICATION/STANDARD DATA: 58536-A-A-55485/5 GOVERNMENT SPECIFICATION
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.087 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN
TEST DATA DOCUMENT58536-A-A-55485 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIALPLASTIC DIALLYL PHTHALATE
UNTHREADED MOUNTING HOLE DIAMETER0.025 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
MOUNTING FACILITY TYPE AND QUANTITY10 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
OVERALL LENGTH0.370 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA58536-A-A-55485/5 GOVERNMENT SPECIFICATION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-14,TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL WIDTH0.370 INCHES NOMINAL IN
OVERALL HEIGHT0.087 INCHES MINIMUM AND 0.091 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
A-A-55485/5Upgraded Successor
successor cross-reference
successor
A-A-55485/05Upgraded Successor
successor cross-reference
successor
A-55485/05-002NUpgraded Successor
successor cross-reference
successor
MIL-M-38527/5Upgraded Successor
successor cross-reference
successor
M38527/5-01NUpgraded Successor
successor cross-reference
successor
M38527/5-02NUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 008-010912?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 008-010912?
008-010912 is a 008-010912. It is classified as a MRO (MRO_GENERAL).
What parts can replace 008-010912?
There are 24 known substitutes for 008-010912: A-A-55485/5, A-A-55485/05, A-55485/05-002N and 21 more. Substitute compatibility should be verified for your specific system.
Is 008-010912 still available?
008-010912 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 008-010912

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026