PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00737 SH47 ST164
00737 SH47 ST164 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 5.500 INCHES NOMINAL IN, special_features: CONTAINS NO ASBESTOS, style_designator: CIRCULAR, aperture_diameter: 3.250 INCHES NOMINAL IN, bolt_circle_diameter: 4.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-188-2662, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00737 SH47 ST164
NSN: 5330-00-188-2662
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
hole_diameter0.391 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter5.500 INCHES NOMINAL IN
special_featuresCONTAINS NO ASBESTOS
style_designatorCIRCULAR
aperture_diameter3.250 INCHES NOMINAL IN
bolt_hole_quantity8
bolt_circle_diameter4.625 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
material_document_and_classificationMIL-G-24696 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-188-2662
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00737 SH47 ST164 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 6
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 2.660 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 3.290 INCHES MINIMUM AND 3.310 INCHES MAXIMUM IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.010 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY6
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER2.660 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER3.290 INCHES MINIMUM AND 3.310 INCHES MAXIMUM IN
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER4.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
00737 SH47 ST 164Interchangeable
interchangeable cross-reference
interchangeable
22890-8Interchangeable
interchangeable cross-reference
interchangeable
81125S41-38853ALT1PC14Interchangeable
interchangeable cross-reference
interchangeable
HH-P-96GInterchangeable
interchangeable cross-reference
interchangeable
274372PC6Interchangeable
interchangeable cross-reference
interchangeable
C51905Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00737 SH47 ST164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00737 SH47 ST164?
00737 SH47 ST164 is a GASKET.
What parts can replace 00737 SH47 ST164?
There are 17 known substitutes for 00737 SH47 ST164: 00737 SH47 ST 164, 22890-8, 81125S41-38853ALT1PC14 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00737 SH47 ST164?
00737 SH47 ST164 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-188-2662. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00737 SH47 ST164

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026