Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, hole_diameter: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.875 INCHES NOMINAL IN, aperture_width: 4.625 INCHES NOMINAL IN, overall_length: 7.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-087-6682, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
00737 SH35 ST151
NSN:5330-00-087-6682 FSC:5330 CAGE:14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
material
RUBBER SILICONE CLASS Q OVERALL
temp_rating
-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
hole_diameter
0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
5.875 INCHES NOMINAL IN
aperture_width
4.625 INCHES NOMINAL IN
overall_length
7.500 INCHES NOMINAL IN
aperture_length
6.250 INCHES NOMINAL IN
hardness_rating
60.0 SHORE DUROMETER A NOMINAL OVERALL
special_features
CENTER LINE OF HOLES ALONG LENGTH AND WIDTH LOCATED 0.250 IN. FROM OUTSIDE EDGE OF GASKET IN
inside_corner_radius
0.125 INCHES NOMINAL IN
outside_corner_radius
0.500 INCHES NOMINAL IN
cross-sectional_thickness
0.020 INCHES NOMINAL IN
NSN
5330-00-087-6682
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: FIBRE OR COMPOSITION WITH WIRE INSERT
•
INSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
•
APERTURE WIDTH: 4.625 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE
FIBRE OR COMPOSITION WITH WIRE INSERT
INSIDE CORNER RADIUS
0.125 INCHES NOMINAL IN
OVERALL WIDTH
5.875 INCHES NOMINAL IN
SPECIAL FEATURES
CENTER LINE OF HOLES ALONG LENGTH AND WIDTH LOCATED 0.250 IN. FROM OUTSIDE EDGE OF GASKET IN
APERTURE WIDTH
4.625 INCHES NOMINAL IN
HOLE DIAMETER
0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00737 SH35 ST151?
00737 SH35 ST151 is a GASKET.
What parts can replace 00737 SH35 ST151?
There are 5 known substitutes for 00737 SH35 ST151: 40-8520, 8520, 102475 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00737 SH35 ST151?
00737 SH35 ST151 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-087-6682. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.