PartsTable
Technical Data Sheet
Download PDF

007208-1 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

007208-1: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, rising_pin: NOT INCLUDED, knuckle_type: BUSHING, pin_diameter: 0.125 INCHES NOMINAL IN, overall_length: 8.780 INCHES NOMINAL IN, performance_type: NOT RATED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-249-0178, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
007208-1
NSN: 5340-01-249-0178
FSC: 5340 — Hardware, Commercial
CAGE: 62228 — MEGGITT DEFENSE SYSTEMS, INC. DBA MEGGITT DEFENSE SYSTEMS INC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
rising_pinNOT INCLUDED
knuckle_typeBUSHING
pin_diameter0.125 INCHES NOMINAL IN
overall_length8.780 INCHES NOMINAL IN
knuckle_quantity7
performance_typeNOT RATED
pin_removabilityREMOVABLE
special_features2 HOLES 0.213 IN DIA IN
style_designatorBUTT
material_thickness0.060 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
NSN5340-01-249-0178
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 007208-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.125 INCHES NOMINAL IN
•
MOUNTING HOLE QUANTITY: 5
•
REVERSIBLE FEATURE: NOT INCLUDED
•
STYLE DESIGNATOR: BUTT
•
MOUNTING HOLE DIAMETER: 0.161 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 1.500 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.125 INCHES NOMINAL IN
MOUNTING HOLE QUANTITY5
REVERSIBLE FEATURENOT INCLUDED
STYLE DESIGNATORBUTT
MOUNTING HOLE DIAMETER0.161 INCHES NOMINAL IN
OVERALL LENGTH8.780 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE1.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
PIN REMOVABILITYREMOVABLE
KNUCKLE QUANTITY7
SUBSTITUTES & CROSS-REFERENCES 1
007208Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 007208-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 007208-1?
007208-1 is a HINGE,BUTT.
What parts can replace 007208-1?
There is 1 known substitute for 007208-1: 007208. Substitute compatibility should be verified for your specific system.
What is the NSN for 007208-1?
007208-1 is cataloged in the U.S. Government catalog under NSN 5340-01-249-0178. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 007208-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.