PartsTable / O-RING / 00718
00718
✓ Verified by PartsTable
Displex · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
No more compromises! The 3D real glass display protection "Designed in Germany" is matched 100 % with the top sellers of Apple and Samsung, thus - as a true second skin - offering optimal functionality and all-over protection of the entire top of the device! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-248-3848, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
00718
NSN: 5331-00-248-3848 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material STEEL COMP 2330 OR STEEL COMP 3130 OR STEEL COMP 3135 OR STEEL COMP 8637 OVERALL shank_length 0.812 INCHES NOMINAL IN thread_class 3A A thread_length 0.250 INCHES MINIMUM IN overall_length 1.188 INCHES NOMINAL IN special_features UNTHREADED SHANK 0.312 IN. DIA IN style_designator ROUND, CLOSED thread_direction RIGHT-HAND surface_treatment CADMIUM OVERALL eye_stock_diameter 0.312 INCHES NOMINAL IN eye_inside_diameter 0.188 INCHES NOMINAL IN nominal_thread_diameter 0.190 INCHES IN NSN 5331-00-248-3848
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 00718
MFR: Displex
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.879 INCHES NOMINAL IN
• ELONGATION PERCENTAGE: 200 MAXIMUM
• TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
• CENTER HOLE DIAMETER: 0.734 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.879 INCHES NOMINAL IN ELONGATION PERCENTAGE 200 MAXIMUM TEMP RATING -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF CENTER HOLE DIAMETER 0.734 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
3-66391 Interchangeable interchangeable cross-reference
interchangeable
00520 Interchangeable interchangeable cross-reference
interchangeable
503-S 57 Interchangeable interchangeable cross-reference
interchangeable
350-RT Interchangeable interchangeable cross-reference
interchangeable
44127 Interchangeable interchangeable cross-reference
interchangeable
9937B406 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 00718?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00718?
00718 is a O-RING manufactured by Displex.
What parts can replace 00718?
There are 29 known substitutes for 00718: 3-66391, 00520, 503-S 57 and 26 more. Substitute compatibility should be verified for your specific system.
Is 00718 still available?
00718 is currently cancelled.