PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0070271
0070271 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 1.125 INCHES NOMINAL IN, diameter: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN, material: STEEL COMP 4037 OVERALL, head_style: HEXAGON, chamfer_length: 0.250 INCHES NOMINAL IN, style_designator: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-619-4701, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0070271
NSN: 5315-00-619-4701
FSC: 5315
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
height1.125 INCHES NOMINAL IN
diameter1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
materialSTEEL COMP 4037 OVERALL
head_styleHEXAGON
chamfer_length0.250 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
under_head_length10.000 INCHES NOMINAL IN
width_across_flats2.250 INCHES NOMINAL IN
first_hole_diameter0.531 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-619-4701
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0070271 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.250 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 1.000 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 10.000 INCHES NOMINAL IN
•
FIRST HOLE DIAMETER: 0.531 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
DIAMETER: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
CHAMFER LENGTH0.250 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN1.000 INCHES NOMINAL IN
UNDER HEAD LENGTH10.000 INCHES NOMINAL IN
FIRST HOLE DIAMETER0.531 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
DIAMETER1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
HEAD STYLEHEXAGON
WIDTH ACROSS FLATS2.250 INCHES NOMINAL IN
HEIGHT1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
70271Interchangeable
interchangeable cross-reference
interchangeable
46ACMINUSCASEInterchangeable
interchangeable cross-reference
interchangeable
16VP039-1Interchangeable
interchangeable cross-reference
interchangeable
LE162-0004-5005Interchangeable
interchangeable cross-reference
interchangeable
LE162-0004Interchangeable
interchangeable cross-reference
interchangeable
7527-5005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0070271?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0070271?
0070271 is a PIN,STRAIGHT,HEADED.
What parts can replace 0070271?
There are 7 known substitutes for 0070271: 70271, 46ACMINUSCASE, 16VP039-1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0070271?
0070271 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-619-4701. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0070271

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026