PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 006823
006823 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONTACTOR,MAGNETIC is a the manufacturer industrial component. Key specifications include width: 58.0 MILLIMETERS NOMINAL MM, length: 99.0 MILLIMETERS NOMINAL MM, actuation_method: MAGNETIC, outside_diameter: 8.500 INCHES NOMINAL IN, overall_diameter: 5.0 MILLIMETERS NOMINAL MM, special_features: CONSISTS OF: 055332 PLATE BOTTOM MOUNTING ASSY;055331 BUFFER RUBBER MOUNTING;055330 PLATE TOP MOUNTING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-563-8660, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
006823
NSN: 5330-00-563-8660
FSC: 5330
CAGE: 81118 — EATON CORPORATION (USA)
SPECIFICATIONS
width58.0 MILLIMETERS NOMINAL MM
length99.0 MILLIMETERS NOMINAL MM
actuation_methodMAGNETIC
outside_diameter8.500 INCHES NOMINAL IN
overall_diameter5.0 MILLIMETERS NOMINAL MM
special_featuresCONSISTS OF: 055332 PLATE BOTTOM MOUNTING ASSY;055331 BUFFER RUBBER MOUNTING;055330 PLATE TOP MOUNTING
bolt_circle_diameter7.000 INCHES NOMINAL IN
peripheral_shape_styleROUND
end_item_identification2355-20-001-9922
cross-sectional_thickness0.020 INCHES NOMINAL IN
largest_bolt_hole_diameter0.781 INCHES NOMINAL IN
smallest_bolt_hole_diameter0.656 INCHES NOMINAL IN
NSN5330-00-563-8660
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 006823 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES NOMINAL IN
•
LARGEST BOLT HOLE DIAMETER: 0.781 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 8.500 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 7.000 INCHES NOMINAL IN
•
SMALLEST BOLT HOLE DIAMETER: 0.656 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.020 INCHES NOMINAL IN
LARGEST BOLT HOLE DIAMETER0.781 INCHES NOMINAL IN
OUTSIDE DIAMETER8.500 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER7.000 INCHES NOMINAL IN
SMALLEST BOLT HOLE DIAMETER0.656 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
A6823Interchangeable
interchangeable cross-reference
interchangeable
6823Interchangeable
interchangeable cross-reference
interchangeable
CRF143Interchangeable
interchangeable cross-reference
interchangeable
712099-073Interchangeable
interchangeable cross-reference
interchangeable
A60075Interchangeable
interchangeable cross-reference
interchangeable
695429Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 006823?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 006823?
006823 is a CONTACTOR,MAGNETIC.
What parts can replace 006823?
There are 21 known substitutes for 006823: A6823, 6823, CRF143 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 006823?
006823 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-563-8660. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 006823

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026