PartsTable
Technical Data Sheet
Download PDF

00648410 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

00648410: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, overall_width: 0.380 INCHES NOMINAL IN, overall_length: 0.810 INCHES NOMINAL IN, style_designator: SADDLE MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-087-6851, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00648410
NSN: 5340-01-087-6851
FSC: 5340 — Hardware, Commercial
CAGE: 11939 — KIDDE FIRE FIGHTING, INC. DIV NATIONAL FOAM (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
overall_width0.380 INCHES NOMINAL IN
overall_length0.810 INCHES NOMINAL IN
style_designatorSADDLE MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.188 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.500 INCHES NOMINAL IN
NSN5340-01-087-6851
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00648410 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SADDLE MOUNT
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.500 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSADDLE MOUNT
DIAMETER0.203 INCHES NOMINAL IN
OVERALL LENGTH0.810 INCHES NOMINAL IN
OVERALL WIDTH0.380 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.500 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.188 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 00648410?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00648410?
00648410 is a CLAMP,LOOP.
What is the NSN for 00648410?
00648410 is cataloged in the U.S. Government catalog under NSN 5340-01-087-6851. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00648410

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.