PartsTable
Technical Data Sheet
Download PDF

00648-3 — PIPE,METALLIC

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

00648-3: PIPE,METALLIC.

The PIPE,METALLIC is a the manufacturer industrial component. Key specifications include overall_width: 1.10 INCHES NOMINAL IN, overall_length: 1.10 INCHES NOMINAL IN, bolt_hole_diameter: 0.13 INCHES NOMINAL IN, end_item_identification: NSN 6665-016802920, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross_section_inside_diameter: 0.900 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-580-1074, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00648-3
NSN: 5310-00-580-1074
NIINs: 005801074, 015418604, 016965346
FSC: 5310 — Nuts and Washers
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
overall_width1.10 INCHES NOMINAL IN
overall_length1.10 INCHES NOMINAL IN
bolt_hole_diameter0.13 INCHES NOMINAL IN
bolt_hole_quantity4
end_item_identificationNSN 6665-016802920
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross_section_inside_diameter0.900 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyGASKET, C. CONNECTOR SEAL
outside_edge_to_bolt_hole_center_distance_along_width0.19 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.19 INCHES NOMINAL IN
NSN5310-00-580-1074
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 00648-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: RECESSED
•
OUTSIDE DIAMETER: 0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.108 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 81205-BACW10AN MANUFACTURERS STANDARD
•
RECESS DIAMETER: 0.503 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING34.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORRECESSED
OUTSIDE DIAMETER0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM IN
MATERIAL THICKNESS0.108 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA81205-BACW10AN MANUFACTURERS STANDARD
RECESS DIAMETER0.503 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.418 INCHES MINIMUM AND 0.428 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
2935-05Reference document
Same NSN cross-reference
Reference document — Secondary reference
F2935-05Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AS48-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GB500A5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
BACW10AN5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
67992W524Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 00648-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00648-3?
00648-3 is a PIPE,METALLIC.
What parts can replace 00648-3?
There are 6 known substitutes for 00648-3: 2935-05, F2935-05, AS48-5 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00648-3?
00648-3 is cataloged in the U.S. Government catalog under NSN 5310-00-580-1074. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00648-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.