PartsTable
Technical Data Sheet
Download PDF

006-013000A — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

006-013000A: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 87.0 SHORE DUROMETER A MINIMUM AND 97.0 SHORE DUROMETER A MAXIMUM OVERALL, rim_surface_width: 0.175 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN, peripheral_diameter: 1.250 INCHES NOMINAL IN, center_hole_diameter: 0.875 INCHES NOMINAL IN, cross-sectional_height: 0.312 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-433-9640, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
006-013000A
NSN: 5330-00-433-9640
FSC: 5330 — Packing and Gasket Materials
CAGE: 05262 — FREUDENBERG-NOK GENERAL PARTNERSHIP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating87.0 SHORE DUROMETER A MINIMUM AND 97.0 SHORE DUROMETER A MAXIMUM OVERALL
rim_surface_width0.175 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
peripheral_diameter1.250 INCHES NOMINAL IN
center_hole_diameter0.875 INCHES NOMINAL IN
cross-sectional_height0.312 INCHES MAXIMUM IN
cross-sectional_shape_styleSPECIAL
material_document_and_classificationIDSA 9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-433-9640
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 006-013000A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES MAXIMUM IN
•
HARDNESS RATING: 87.0 SHORE DUROMETER A MINIMUM AND 97.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: IDSA 9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
RIM SURFACE WIDTH: 0.175 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 1.250 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.312 INCHES MAXIMUM IN
HARDNESS RATING87.0 SHORE DUROMETER A MINIMUM AND 97.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONIDSA 9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
RIM SURFACE WIDTH0.175 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER1.250 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.875 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
11579006Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
5489360 FIND 14Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
6640219 FIND 14Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2070-21PC47Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
006-013Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
5489360-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 006-013000A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 006-013000A?
006-013000A is a PACKING,PREFORMED.
What parts can replace 006-013000A?
There are 7 known substitutes for 006-013000A: 11579006, 5489360 FIND 14, 6640219 FIND 14 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 006-013000A?
006-013000A is cataloged in the U.S. Government catalog under NSN 5330-00-433-9640. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 006-013000A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.