PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00536
00536 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CLAMP,QUICK RELEASE is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-442-3838, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00536
NSN: 5315-00-442-3838
FSC: 5315
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
general_characteristics_item_descriptionPISTOL GRIP; GENERAL PURPOSE TYPE; 0 TO 36 IN. JAW CAPACITY; 3-1/4 IN. THROAT CAPACITY; QUICK RELEASE TRIGGER; NON-MARRING PADS IN
NSN5315-00-442-3838
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 00536 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
•
FIRST END SLOT DEPTH: 0.125 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
FIRST END STYLE: SLOTTED
•
FIRST END LOCATION: SLOT END
•
FIRST END SLOT WIDTH: 0.031 INCHES NOMINAL IN
•
PIN SIZE DESIGNATION: 3/0
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
FIRST END SLOT DEPTH0.125 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
FIRST END STYLESLOTTED
FIRST END LOCATIONSLOT END
FIRST END SLOT WIDTH0.031 INCHES NOMINAL IN
PIN SIZE DESIGNATION3/0
MATERIALSTEEL OVERALL
SECOND END STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
363860Interchangeable
interchangeable cross-reference
interchangeable
00536Interchangeable
interchangeable cross-reference
interchangeable
QUICK-GRIPInterchangeable
interchangeable cross-reference
interchangeable
536QCNInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00536?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00536?
00536 is a CLAMP,QUICK RELEASE.
What parts can replace 00536?
There are 4 known substitutes for 00536: 363860, 00536, QUICK-GRIP and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00536?
00536 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-442-3838. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00536

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026