PartsTable
Technical Data Sheet
Download PDF

0052408 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0052408: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 9.750 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 8.000 INCHES NOMINAL IN, bolt_circle_diameter: 8.562 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-789-6661, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0052408
NSN: 5330-00-789-6661
FSC: 5330 — Packing and Gasket Materials
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter9.750 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter8.000 INCHES NOMINAL IN
bolt_hole_quantity3
bolt_circle_diameter8.562 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-789-6661
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0052408 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 9.750 INCHES NOMINAL IN
•
APERTURE DIAMETER: 8.000 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 3
•
BOLT CIRCLE DIAMETER: 8.562 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER9.750 INCHES NOMINAL IN
APERTURE DIAMETER8.000 INCHES NOMINAL IN
BOLT HOLE QUANTITY3
BOLT CIRCLE DIAMETER8.562 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
052408Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 0052408?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0052408?
0052408 is a GASKET.
What parts can replace 0052408?
There is 1 known substitute for 0052408: 052408. Substitute compatibility should be verified for your specific system.
What is the NSN for 0052408?
0052408 is cataloged in the U.S. Government catalog under NSN 5330-00-789-6661. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0052408

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.