PartsTable / O-RING / 00514
00514
✓ Verified by PartsTable
SES Creative · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
Feel good dough! The SES dough in four cheerful colours. Dough that makes you feel good! The dough is fully vegan, gluten free and super washable. It's bright and soft.
And the resealable packaging keeps your dough good for longer. Finished playing with the dough? Scan the QR code on the packaging and find out what you can do with the packaging! The Feel good Relax dough comes in the calm pastel colours of pink, purple, white and light green. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-248-3846, indicating validated use in U.S.
government and defense logistics supply chains.
WHERE IT FITS
00514
NSN: 5331-00-248-3846 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 0.803 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN center_hole_diameter 0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN NSN 5331-00-248-3846
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 00514
MFR: SES Creative
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 0.803 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 0.803 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
31482 Interchangeable interchangeable cross-reference
interchangeable
7616 Interchangeable interchangeable cross-reference
interchangeable
2N13007C Interchangeable interchangeable cross-reference
interchangeable
934012 Interchangeable interchangeable cross-reference
interchangeable
804777-00 Interchangeable interchangeable cross-reference
interchangeable
902-12-711-70 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 00514?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00514?
00514 is a O-RING manufactured by SES Creative.
What parts can replace 00514?
There are 32 known substitutes for 00514: 31482, 7616, 2N13007C and 29 more. Substitute compatibility should be verified for your specific system.
Is 00514 still available?
00514 is currently cancelled.