PartsTable / O-RING / 00511
00511
✓ Verified by PartsTable
SES Creative · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
Feel good dough! The SES dough in four cheerful colours. Dough that makes you feel good! The dough is fully vegan, gluten free and super washable. It's bright and soft.
And the resealable packaging keeps your dough good for longer. Finished playing with the dough? Scan the QR code on the packaging and find out what you can do with the packaging! The Feel good Pure dough comes in bright green, yellow, light blue and red. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-248-3831, indicating validated use in U.S.
government and defense logistics supply chains.
WHERE IT FITS
00511
NSN: 5331-00-248-3831 FSC: 5331 — O-RINGCAGE: 86184 — GRISWOLD INDUSTRIES DBA CLA-VAL CO (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN center_hole_diameter 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN NSN 5331-00-248-3831
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 00511
MFR: SES Creative
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
DC500-2 Interchangeable interchangeable cross-reference
interchangeable
2 Interchangeable interchangeable cross-reference
interchangeable
ASHRAE 52.1 Interchangeable interchangeable cross-reference
interchangeable
44-166 Interchangeable interchangeable cross-reference
interchangeable
K10E44A Interchangeable interchangeable cross-reference
interchangeable
37902 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 00511?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00511?
00511 is a HEPA FILTER 5GAL manufactured by SES Creative.
What parts can replace 00511?
There are 25 known substitutes for 00511: DC500-2, 2, ASHRAE 52.1 and 22 more. Substitute compatibility should be verified for your specific system.
Is 00511 still available?
00511 is currently cancelled.