PartsTable
Technical Data Sheet
PartsTable / O-RING / 00510
00510 ✓ Verified by PartsTable
Duracell · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

This area allows consumers like you to express their own opinions and comments. Duracell does not represent or warrant the accuracy of any statements or product claims made here, nor endorses any opinions expressed by the reviewer. This consumer received rewards from expotv.com for providing their opinion of this product.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-159-3464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00510
NSN: 5331-00-159-3464
FSC: 5331 — O-RING
CAGE: 86184 — GRISWOLD INDUSTRIES DBA CLA-VAL CO (USA)
SPECIFICATIONS
materialPAPER FILTERING MEDIUM
filtering_media_designCORRUGATED SINGLE FILTERING MEDIA RESPONSE
end_item_identificationFUEL OIL SYSTEM -IPV EIC SED12
media_for_which_designedFUEL/OIL, HYDROCARBON
filtration_rating_in_microns10.0 NOMINAL
part_name_assigned_by_controlling_agencySEOAR 2000 FILTER
NSN5331-00-159-3464
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00510 MFR: Duracell ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
00510Interchangeable
interchangeable cross-reference
interchangeable
01-2200-000Interchangeable
interchangeable cross-reference
interchangeable
199V496P21Interchangeable
interchangeable cross-reference
interchangeable
00507Interchangeable
interchangeable cross-reference
interchangeable
64785PC5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00510?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00510?
00510 is a FILTER ELEMENT,FLUID manufactured by Duracell.
What parts can replace 00510?
There are 5 known substitutes for 00510: 00510, 01-2200-000, 199V496P21 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00510?
00510 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-159-3464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00510

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026