PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 005-135
005-135 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,EYE,ROTATING SHAFT is a the manufacturer industrial component. Key specifications include reference_number_differentiating_characteristics: MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-738-4437, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
005-135
NSN: 5330-00-738-4437
FSC: 5330
CAGE: 05262 — FREUDENBERG-NOK GENERAL PARTNERSHIP (USA)
SPECIFICATIONS
reference_number_differentiating_characteristicsMAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
NSN5330-00-738-4437
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 005-135 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: U
•
CENTER HOLE DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
PERIPHERAL DIAMETER: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEU
CENTER HOLE DIAMETER1.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
PERIPHERAL DIAMETER1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
S1649Interchangeable
interchangeable cross-reference
interchangeable
AA-424-316-2CW 5/16BORE/ALInterchangeable
interchangeable cross-reference
interchangeable
M-1965Interchangeable
interchangeable cross-reference
interchangeable
005135Interchangeable
interchangeable cross-reference
interchangeable
005135VMInterchangeable
interchangeable cross-reference
interchangeable
0051359Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 005-135?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 005-135?
005-135 is a BRACKET,EYE,ROTATING SHAFT.
What parts can replace 005-135?
There are 6 known substitutes for 005-135: S1649, AA-424-316-2CW 5/16BORE/AL, M-1965 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 005-135?
005-135 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-738-4437. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 005-135

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026