PartsTable
Technical Data Sheet
Download PDF

004D11110-1 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

004D11110-1: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_thickness: 1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN, thread_series: STUB ACME, nominal_thread_size: 8.500 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-392-9365, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
004D11110-1
NSN: 5310-01-392-9365
FSC: 5310 — Nuts and Washers
CAGE: 00994 — COLUMBUS JACK CORPORATION DIV COLUMBUS JACK (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_thickness1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN
thread_seriesSTUB ACME
nominal_thread_size8.500 INCHES IN
drive_point_quantity6
thread_quantity_per_inch4
NSN5310-01-392-9365
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 004D11110-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: STUB ACME
•
NOMINAL THREAD SIZE: 8.500 INCHES IN
•
NUT THICKNESS: 1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN
•
DRIVE POINT QUANTITY: 6
•
THREAD QUANTITY PER INCH: 4
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESSTUB ACME
NOMINAL THREAD SIZE8.500 INCHES IN
NUT THICKNESS1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM IN
DRIVE POINT QUANTITY6
THREAD QUANTITY PER INCH4
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 004D11110-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 004D11110-1?
004D11110-1 is a NUT,PLAIN,ROUND.
What is the NSN for 004D11110-1?
004D11110-1 is cataloged in the U.S. Government catalog under NSN 5310-01-392-9365. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 004D11110-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.