PartsTable
Technical Data Sheet
0049490 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, housing_bore_diameter: 1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6815, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0049490
NSN: 5330-00-286-6815
FSC: 5330
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
housing_bore_diameter1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed262 FEET PER MINUTE FT
NSN5330-00-286-6815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0049490 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLE: SQUARE
HOUSING BORE DIAMETER: 1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SEAL WIDTH: 0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 262 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
HOUSING BORE DIAMETER1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SEAL WIDTH0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED262 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
490120Interchangeable
interchangeable cross-reference
interchangeable
049490Interchangeable
interchangeable cross-reference
interchangeable
32-09490Interchangeable
interchangeable cross-reference
interchangeable
A-A-59282Interchangeable
interchangeable cross-reference
interchangeable
O-C-265Interchangeable
interchangeable cross-reference
interchangeable
5092Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0049490?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0049490?
0049490 is a SEAL,PLAIN ENCASED.
What parts can replace 0049490?
There are 26 known substitutes for 0049490: 490120, 049490, 32-09490 and 23 more. Substitute compatibility should be verified for your specific system.
Is 0049490 still available?
0049490 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0049490