PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0044297-0
0044297-0 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1144 OVERALL, nut_style: HEXAGON, nut_height: 0.766 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-208-5279, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0044297-0
NSN: 5310-00-208-5279
FSC: 5310
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialSTEEL COMP 1144 OVERALL
nut_styleHEXAGON
nut_height0.766 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.860 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
nominal_thread_size0.562 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch18
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-208-5279
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0044297-0 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
BEARING SURFACE TYPE: WASHER FACED
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
THREAD QUANTITY PER INCH: 18
•
THREAD SERIES: UNF
•
NUT STYLE: HEXAGON
•
WIDTH ACROSS FLATS: 0.860 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1144 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
BEARING SURFACE TYPEWASHER FACED
NOMINAL THREAD SIZE0.562 INCHES IN
THREAD QUANTITY PER INCH18
THREAD SERIESUNF
NUT STYLEHEXAGON
WIDTH ACROSS FLATS0.860 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1144 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NUT HEIGHT0.766 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
004429-7Interchangeable
interchangeable cross-reference
interchangeable
70452Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0044297-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0044297-0?
0044297-0 is a NUT,PLAIN,HEXAGON.
What parts can replace 0044297-0?
There are 2 known substitutes for 0044297-0: 004429-7, 70452. Substitute compatibility should be verified for your specific system.
Is 0044297-0 still available?
0044297-0 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0044297-0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026