PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0043013
0043013 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, flange_width: 0.3125 INCHES NOMINAL IN, overall_width: 1.5000 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, FLANGED, backface_corner_radius: 0.1250 INCHES NOMINAL IN, flange_outside_diameter: 6.6830 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4402, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0043013
NSN: 3110-00-142-4402
FSC: 3110
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
flange_width0.3125 INCHES NOMINAL IN
overall_width1.5000 INCHES NOMINAL IN
style_designatorNORMAL ANGLE, FLANGED
backface_corner_radius0.1250 INCHES NOMINAL IN
flange_outside_diameter6.6830 INCHES NOMINAL IN
outer_ring_outside_diameter6.3750 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-142-4402
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 0043013 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH: 0.3125 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
FLANGE OUTSIDE DIAMETER: 6.6830 INCHES NOMINAL IN
•
OUTER RING OUTSIDE DIAMETER: 6.3750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE, FLANGED
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE WIDTH0.3125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
FLANGE OUTSIDE DIAMETER6.6830 INCHES NOMINAL IN
OVERALL WIDTH1.5000 INCHES NOMINAL IN
OUTER RING OUTSIDE DIAMETER6.3750 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE, FLANGED
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
752BInterchangeable
interchangeable cross-reference
interchangeable
1652Interchangeable
interchangeable cross-reference
interchangeable
1177-SInterchangeable
interchangeable cross-reference
interchangeable
5323Interchangeable
interchangeable cross-reference
interchangeable
102-0101-09Interchangeable
interchangeable cross-reference
interchangeable
043 013Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0043013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0043013?
0043013 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 0043013?
There are 9 known substitutes for 0043013: 752B, 1652, 1177-S and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0043013?
0043013 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4402. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0043013

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026