PartsTable
Technical Data Sheet
PartsTable / O-RING / 004-711-70
004-711-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-933-8785, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
004-711-70
NSN: 5331-00-933-8785
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-933-8785
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 004-711-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
536100-14Interchangeable
interchangeable cross-reference
interchangeable
341429-2Interchangeable
146GB SAS 3.5"
interchangeable
1855654-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 004-711-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 004-711-70?
004-711-70 is a O-RING.
What parts can replace 004-711-70?
There are 3 known substitutes for 004-711-70: 536100-14, 341429-2, 1855654-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 004-711-70?
004-711-70 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-933-8785. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
Loading comments...
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 004-711-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026