PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00355
00355 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PARTS KIT,TRUNNION INDICATOR is a the manufacturer industrial component. Key specifications include physical_form: PASTE, special_features: 4-3/4 LB,USED ON 80 DISPENSER LBS, removal_w/water_feature: NOT INCLUDED, purpose_for_which_designed: REMOVAL OF GREASE AND REMOVAL OF INK AND REMOVAL OF PAINT AND REMOVAL OF TAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-784-3036, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00355
NSN: 5310-00-784-3036
FSC: 5310
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
physical_formPASTE
special_features4-3/4 LB,USED ON 80 DISPENSER LBS
removal_w/water_featureNOT INCLUDED
purpose_for_which_designedREMOVAL OF GREASE AND REMOVAL OF INK AND REMOVAL OF PAINT AND REMOVAL OF TAR
NSN5310-00-784-3036
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 00355 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 301 OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
RECESS ANGLE: 99.0 DEGREES MINIMUM AND 103.0 DEGREES MAXIMUM
•
RECESS DIAMETER: 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FINISHING
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 301 OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
RECESS ANGLE99.0 DEGREES MINIMUM AND 103.0 DEGREES MAXIMUM
RECESS DIAMETER0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
STYLE DESIGNATORFINISHING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL THICKNESS0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
HOLE DIAMETER0.193 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
OVERALL HEIGHT0.080 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
RCS3Interchangeable
interchangeable cross-reference
interchangeable
H 55-16-80Interchangeable
interchangeable cross-reference
interchangeable
MILS36377Interchangeable
interchangeable cross-reference
interchangeable
ADB00355Interchangeable
interchangeable cross-reference
interchangeable
00355Interchangeable
interchangeable cross-reference
interchangeable
703009Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00355?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00355?
00355 is a PARTS KIT,TRUNNION INDICATOR.
What parts can replace 00355?
There are 9 known substitutes for 00355: RCS3, H 55-16-80, MILS36377 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00355?
00355 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-784-3036. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00355

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026