PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00352 SH ST 6
00352 SH ST 6 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

CONTROL ASSEMBLY,GATE,LEVER SHIF. Key specifications include material: COPPER ALLOY OVERALL, corner_shape: SQUARE INSIDE LEFT CORNER, flange_width: 0.0400 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM IN, overall_length: 0.1890 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM IN, special_features: OD AND ID PARALLEL WITHIN 0.0020 IN. TIR IN, style_designator: SOLID, EXTERNAL FLANGE ONE END.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-980-8829, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00352 SH ST 6
NSN: 3120-00-980-8829
FSC: 3120
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
corner_shapeSQUARE INSIDE LEFT CORNER
flange_width0.0400 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM IN
overall_length0.1890 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM IN
special_featuresOD AND ID PARALLEL WITHIN 0.0020 IN. TIR IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.1877 INCHES MINIMUM AND 0.1879 INCHES MAXIMUM IN
body_outside_diameter0.4999 INCHES MINIMUM AND 0.5001 INCHES MAXIMUM IN
flange_outside_diameter0.5600 INCHES MINIMUM AND 0.5700 INCHES MAXIMUM IN
nondefinitive_spec/std_data1 TYPE AND A COMPOSITION
material_document_and_classificationMIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3120-00-980-8829
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 00352 SH ST 6 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: OIL LUBRICATING LUBRICATION
•
BODY OUTSIDE DIAMETER: 0.4999 INCHES MINIMUM AND 0.5001 INCHES MAXIMUM IN
•
FLANGE OUTSIDE DIAMETER: 0.5600 INCHES MINIMUM AND 0.5700 INCHES MAXIMUM IN
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
•
FLANGE WIDTH: 0.0400 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, EXTERNAL FLANGE ONE END
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALOIL LUBRICATING LUBRICATION
BODY OUTSIDE DIAMETER0.4999 INCHES MINIMUM AND 0.5001 INCHES MAXIMUM IN
FLANGE OUTSIDE DIAMETER0.5600 INCHES MINIMUM AND 0.5700 INCHES MAXIMUM IN
CORNER SHAPESQUARE INSIDE RIGHT CORNER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
FLANGE WIDTH0.0400 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SPECIAL FEATURESOD AND ID PARALLEL WITHIN 0.0020 IN. TIR IN
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
NONDEFINITIVE SPEC/STD DATA1 TYPE AND A COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
541-4613-002Interchangeable
interchangeable cross-reference
interchangeable
127108Interchangeable
interchangeable cross-reference
interchangeable
WWC633TYPE1Interchangeable
interchangeable cross-reference
interchangeable
K12KMCInterchangeable
interchangeable cross-reference
interchangeable
AM6Interchangeable
interchangeable cross-reference
interchangeable
2088199-0003Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00352 SH ST 6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00352 SH ST 6?
00352 SH ST 6 is a CONTROL ASSEMBLY,GATE,LEVER SHIF.
What parts can replace 00352 SH ST 6?
There are 14 known substitutes for 00352 SH ST 6: 541-4613-002, 127108, WWC633TYPE1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00352 SH ST 6?
00352 SH ST 6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-980-8829. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00352 SH ST 6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026