PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 003454-007
003454-007 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-095-1203, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
003454-007
NSN: 5330-01-095-1203
FSC: 5330
CAGE: 12763 — DYNALEC CORPORATION (USA)
SPECIFICATIONS
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH NAVICP ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
NSN5330-01-095-1203
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 003454-007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
APERTURE WIDTH: 1.000 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.187 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 2
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE LENGTH: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
APERTURE WIDTH1.000 INCHES NOMINAL IN
HOLE DIAMETER0.187 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY2
STYLE DESIGNATORNON-CIRCULAR
APERTURE LENGTH3.000 INCHES NOMINAL IN
OVERALL LENGTH3.937 INCHES NOMINAL IN
OVERALL WIDTH1.187 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
3004131Interchangeable
interchangeable cross-reference
interchangeable
211586Interchangeable
interchangeable cross-reference
interchangeable
482Interchangeable
interchangeable cross-reference
interchangeable
3339Interchangeable
interchangeable cross-reference
interchangeable
F27342Interchangeable
interchangeable cross-reference
interchangeable
172-453Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 003454-007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 003454-007?
003454-007 is a GASKET.
What parts can replace 003454-007?
There are 13 known substitutes for 003454-007: 3004131, 211586, 482 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 003454-007?
003454-007 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-095-1203. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 003454-007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026