PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00315-2
00315-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN, outside_diameter: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, style_designator: CONVEX, surface_treatment: CADMIUM OR ZINC OVERALL, material_thickness: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0725, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00315-2
NSN: 5310-00-167-0725
FSC: 5310
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN
outside_diameter0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
style_designatorCONVEX
surface_treatmentCADMIUM OR ZINC OVERALL
material_thickness0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
NSN5310-00-167-0725
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 00315-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
STYLE DESIGNATOR: CONVEX
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
MATERIAL THICKNESS0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
STYLE DESIGNATORCONVEX
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
980628-4Interchangeable
interchangeable cross-reference
interchangeable
955-4Interchangeable
interchangeable cross-reference
interchangeable
25236-4-4SInterchangeable
interchangeable cross-reference
interchangeable
658536Interchangeable
interchangeable cross-reference
interchangeable
A95-54Interchangeable
interchangeable cross-reference
interchangeable
SCD17000-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00315-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00315-2?
00315-2 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 00315-2?
There are 12 known substitutes for 00315-2: 980628-4, 955-4, 25236-4-4S and 9 more. Substitute compatibility should be verified for your specific system.
Is 00315-2 still available?
00315-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00315-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026