PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00302
00302 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: COPPER ALLOY, design_type: FRICTION, overall_diameter: 0.255 INCHES NOMINAL IN, surface_treatment: NICKEL, inside_diameter_length: 0.750 INCHES NOMINAL IN, tube_outside_diameter_for_which_designed: 0.255 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-051-9968, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00302
NSN: 5340-01-051-9968
FSC: 5340
CAGE: 24981 — APACHE CORP GITS BROS MFG CO (USA)
SPECIFICATIONS
materialCOPPER ALLOY
design_typeFRICTION
overall_diameter0.255 INCHES NOMINAL IN
surface_treatmentNICKEL
inside_diameter_length0.750 INCHES NOMINAL IN
tube_outside_diameter_for_which_designed0.255 INCHES NOMINAL IN
opening_inside_diameter_for_which_designed0.219 INCHES NOMINAL IN
NSN5340-01-051-9968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00302 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
SURFACE TREATMENT: NICKEL
•
MATERIAL: COPPER ALLOY
•
OVERALL DIAMETER: 0.255 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.219 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.255 INCHES NOMINAL IN
•
INSIDE DIAMETER LENGTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPEFRICTION
SURFACE TREATMENTNICKEL
MATERIALCOPPER ALLOY
OVERALL DIAMETER0.255 INCHES NOMINAL IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.219 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.255 INCHES NOMINAL IN
INSIDE DIAMETER LENGTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
A102Interchangeable
interchangeable cross-reference
interchangeable
27E126AND20C250Interchangeable
interchangeable cross-reference
interchangeable
9XR10-2Interchangeable
interchangeable cross-reference
interchangeable
3660091Interchangeable
interchangeable cross-reference
interchangeable
02621Interchangeable
interchangeable cross-reference
interchangeable
01010Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00302?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00302?
00302 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 00302?
There are 18 known substitutes for 00302: A102, 27E126AND20C250, 9XR10-2 and 15 more. Substitute compatibility should be verified for your specific system.
Is 00302 still available?
00302 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00302

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026