PartsTable
Technical Data Sheet
Download PDF

003-0009200 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

003-0009200: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL, center_hole_diameter: 0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING, material_document_and_classification: 8309 FSCM 25184 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-012-7419, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
003-0009200
NSN: 5330-01-012-7419
FSC: 5330 — Packing and Gasket Materials
CAGE: D0116 — MECALAC BAUMASCHINEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
center_hole_diameter0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
material_document_and_classification8309 FSCM 25184 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-012-7419
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 003-0009200 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 8309 FSCM 25184 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CENTER HOLE DIAMETER: 0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION8309 FSCM 25184 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
CENTER HOLE DIAMETER0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
PRP110-8309Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ORAR00110-N9038Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6990501100Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 003-0009200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 003-0009200?
003-0009200 is a PACKING,PREFORMED.
What parts can replace 003-0009200?
There are 3 known substitutes for 003-0009200: PRP110-8309, ORAR00110-N9038, 6990501100. Substitute compatibility should be verified for your specific system.
What is the NSN for 003-0009200?
003-0009200 is cataloged in the U.S. Government catalog under NSN 5330-01-012-7419. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 003-0009200

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.