PartsTable
Technical Data Sheet
PartsTable / O-RING / 00289
00289 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, second_end_style: RADIUS, surface_treatment: LACQUER OVERALL, pin_overall_length: 0.990 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN, pin_overall_diameter: 0.1259 INCHES MINIMUM AND 0.1261 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-007-6093, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00289
NSN: 5331-00-007-6093
FSC: 5331 — O-RING
CAGE: 86184 — GRISWOLD INDUSTRIES DBA CLA-VAL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
second_end_styleRADIUS
surface_treatmentLACQUER OVERALL
pin_overall_length0.990 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
pin_overall_diameter0.1259 INCHES MINIMUM AND 0.1261 INCHES MAXIMUM IN
first_end_taper_angle4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
first_end_taper_length0.045 INCHES NOMINAL IN
second_end_corner_radius0.031 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5331-00-007-6093
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00289 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.094 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
12600954-017Interchangeable
interchangeable cross-reference
interchangeable
COV-1313Interchangeable
interchangeable cross-reference
interchangeable
00695Interchangeable
interchangeable cross-reference
interchangeable
30504768PC12Interchangeable
interchangeable cross-reference
interchangeable
2-112E515-80Interchangeable
interchangeable cross-reference
interchangeable
4909800Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00289?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00289?
00289 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 00289?
There are 8 known substitutes for 00289: 12600954-017, COV-1313, 00695 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00289?
00289 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-007-6093. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00289

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026