PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00265-4
00265-4 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL, nut_style: SLEEVE, nut_length: 0.107 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN, nut_diameter: 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-736-9048, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00265-4
NSN: 5310-00-736-9048
FSC: 5310
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL
nut_styleSLEEVE
nut_length0.107 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
nut_diameter0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
flange_diameter0.344 INCHES NOMINAL IN
flange_thickness0.063 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentANODIZE OVERALL
nominal_thread_size0.164 INCHES IN
cross-sectional_shapeROUND OVERALL
NSN5310-00-736-9048
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 00265-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B
•
FLANGE DIAMETER: 0.344 INCHES NOMINAL IN
•
NUT DIAMETER: 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
•
NUT LENGTH: 0.107 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.063 INCHES NOMINAL IN
•
NUT STYLE: SLEEVE
•
MATERIAL: ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL
•
SURFACE TREATMENT: ANODIZE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B
FLANGE DIAMETER0.344 INCHES NOMINAL IN
NUT DIAMETER0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
NUT LENGTH0.107 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
FLANGE THICKNESS0.063 INCHES NOMINAL IN
NUT STYLESLEEVE
MATERIALALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OVERALL
SURFACE TREATMENTANODIZE OVERALL
THREAD QUANTITY PER INCH32
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
25055052Interchangeable
interchangeable cross-reference
interchangeable
ML620-7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00265-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00265-4?
00265-4 is a NUT,SLEEVE.
What parts can replace 00265-4?
There are 2 known substitutes for 00265-4: 25055052, ML620-7. Substitute compatibility should be verified for your specific system.
What is the NSN for 00265-4?
00265-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-736-9048. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00265-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026