PartsTable
Technical Data Sheet
Download PDF

0026-2412-2 — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0026-2412-2: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2014 OVERALL, closed_length: 10.650 INCHES NOMINAL IN, extended_length: 25.869 INCHES MINIMUM AND 25.931 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL, side_for_which_designed: RIGHT HAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-090-3920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0026-2412-2
NSN: 5340-00-090-3920
FSC: 5340 — Hardware, Commercial
CAGE: 14304 — L3HARRIS TECHNOLOGIES, INC. DBA HARRIS CORP DIV HARRIS DEFENSE COMMUNICATIONS (USA)
SPECIFICATIONS
width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2014 OVERALL
closed_length10.650 INCHES NOMINAL IN
extended_length25.869 INCHES MINIMUM AND 25.931 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
side_for_which_designedRIGHT HAND
material_document_and_classificationQQ-A-200/2,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-090-3920
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0026-2412-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED LENGTH: 25.869 INCHES MINIMUM AND 25.931 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/2,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CLOSED LENGTH: 10.650 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 2014 OVERALL
•
SIDE FOR WHICH DESIGNED: RIGHT HAND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED LENGTH25.869 INCHES MINIMUM AND 25.931 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/2,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CLOSED LENGTH10.650 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2014 OVERALL
SIDE FOR WHICH DESIGNEDRIGHT HAND
SUBSTITUTES & CROSS-REFERENCES 2
120754-RSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A70271-001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 0026-2412-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0026-2412-2?
0026-2412-2 is a SLIDE,DRAWER,EXTENSION.
What parts can replace 0026-2412-2?
There are 2 known substitutes for 0026-2412-2: 120754-R, A70271-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 0026-2412-2?
0026-2412-2 is cataloged in the U.S. Government catalog under NSN 5340-00-090-3920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0026-2412-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.