PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00237-0213
00237-0213 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE BODY, overall_height: 4.415 INCHES NOMINAL IN, style_designator: THRU-HOLE, material_thickness: 0.062 INCHES NOMINAL IN, base_inside_diameter: 2.000 INCHES NOMINAL IN, base_outside_diameter: 2.420 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-456-5601, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00237-0213
NSN: 5340-00-456-5601
FSC: 5340
CAGE: 93568 — HARSCO CORP BMY-COMBAT SYSTEMS DIV (USA)
SPECIFICATIONS
materialRUBBER SILICONE BODY
overall_height4.415 INCHES NOMINAL IN
style_designatorTHRU-HOLE
material_thickness0.062 INCHES NOMINAL IN
base_inside_diameter2.000 INCHES NOMINAL IN
base_outside_diameter2.420 INCHES NOMINAL IN
body_outside_diameter2.950 INCHES NOMINAL IN
opening_inside_diameter0.342 INCHES NOMINAL IN
NSN5340-00-456-5601
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00237-0213 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 2.950 INCHES NOMINAL IN
•
BASE INSIDE DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: THRU-HOLE
•
BASE OUTSIDE DIAMETER: 2.420 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER: 0.342 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE BODY
TECHNICAL CHARACTERISTICS (FLIS)
BODY OUTSIDE DIAMETER2.950 INCHES NOMINAL IN
BASE INSIDE DIAMETER2.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORTHRU-HOLE
OVERALL HEIGHT4.415 INCHES NOMINAL IN
BASE OUTSIDE DIAMETER2.420 INCHES NOMINAL IN
OPENING INSIDE DIAMETER0.342 INCHES NOMINAL IN
MATERIALRUBBER SILICONE BODY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
20-425Interchangeable
interchangeable cross-reference
interchangeable
2-1-2X3JMInterchangeable
interchangeable cross-reference
interchangeable
885C843P2Interchangeable
interchangeable cross-reference
interchangeable
MS35319-568Interchangeable
interchangeable cross-reference
interchangeable
97-5109-14S2SInterchangeable
interchangeable cross-reference
interchangeable
BAA113Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00237-0213?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00237-0213?
00237-0213 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 00237-0213?
There are 15 known substitutes for 00237-0213: 20-425, 2-1-2X3JM, 885C843P2 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00237-0213?
00237-0213 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-456-5601. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00237-0213

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026