PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00210-0058-0
00210-0058-0 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, shank_length: 0.375 INCHES NOMINAL IN, overall_height: 0.438 INCHES NOMINAL IN, shank_diameter: 0.156 INCHES NOMINAL IN, style_designator: FLANGED ROUND SHANK, material_hardness_rating: 55.0 DUROMETER MINIMUM AND 65.0 DUROMETER MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-779-4573, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00210-0058-0
NSN: 5340-00-779-4573
FSC: 5340
CAGE: 81867 — ELECTRONIC ASSOCIATES INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
shank_length0.375 INCHES NOMINAL IN
overall_height0.438 INCHES NOMINAL IN
shank_diameter0.156 INCHES NOMINAL IN
style_designatorFLANGED ROUND SHANK
material_hardness_rating55.0 DUROMETER MINIMUM AND 65.0 DUROMETER MAXIMUM
outside/top_flange_diameter0.250 INCHES NOMINAL IN
material_document_and_classificationMIL-STD-417, TYPE R, CLASS RS, GRADE RS615BC1F1 MIL STD SINGLE MATERIAL RESPONSE
NSN5340-00-779-4573
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00210-0058-0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.156 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLANGED ROUND SHANK
•
OUTSIDE/TOP FLANGE DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
MATERIAL HARDNESS RATING: 55.0 DUROMETER MINIMUM AND 65.0 DUROMETER MAXIMUM
•
SHANK LENGTH: 0.375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-STD-417, TYPE R, CLASS RS, GRADE RS615BC1F1 MIL STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
SHANK DIAMETER0.156 INCHES NOMINAL IN
STYLE DESIGNATORFLANGED ROUND SHANK
OVERALL HEIGHT0.438 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
MATERIAL HARDNESS RATING55.0 DUROMETER MINIMUM AND 65.0 DUROMETER MAXIMUM
SHANK LENGTH0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-STD-417, TYPE R, CLASS RS, GRADE RS615BC1F1 MIL STD SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
7276Upgraded Successor
successor cross-reference
successor
1165Upgraded Successor
successor cross-reference
successor
8263-2Upgraded Successor
successor cross-reference
successor
29446Upgraded Successor
successor cross-reference
successor
5AG15Interchangeable
interchangeable cross-reference
interchangeable
AGU-15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00210-0058-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00210-0058-0?
00210-0058-0 is a BUMPER.
What parts can replace 00210-0058-0?
There are 23 known substitutes for 00210-0058-0: 7276, 1165, 8263-2 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00210-0058-0?
00210-0058-0 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-779-4573. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00210-0058-0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026