PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 002.19.06.0001. 0002
002.19.06.0001. 0002 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 002.19.06.0001. 0002 is a the manufacturer industrial component. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-008-9370, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
002.19.06.0001. 0002
NSN: 5330-01-008-9370
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part Number002.19.06.0001. 0002
NSN5330-01-008-9370
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 002.19.06.0001. 0002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: PLASTIC OVERALL
•
OUTSIDE DIAMETER: 0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
MATERIALPLASTIC OVERALL
OUTSIDE DIAMETER0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
APERTURE DIAMETER0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
002-19-06-0001-0002Interchangeable
interchangeable cross-reference
interchangeable
2620-926X4PC8-1-4INInterchangeable
interchangeable cross-reference
interchangeable
R02-19-06-0001-Interchangeable
interchangeable cross-reference
interchangeable
808956Interchangeable
Same NIIN cross-reference
interchangeable
219-06-01Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 002.19.06.0001. 0002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 002.19.06.0001. 0002?
002.19.06.0001. 0002 is a 002.19.06.0001. 0002.
What parts can replace 002.19.06.0001. 0002?
There are 5 known substitutes for 002.19.06.0001. 0002: 002-19-06-0001-0002, 2620-926X4PC8-1-4IN, R02-19-06-0001- and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 002.19.06.0001. 0002?
002.19.06.0001. 0002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-008-9370. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 002.19.06.0001. 0002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026