PartsTable
Technical Data Sheet
Download PDF

001822 — CONNECTOR,TUBING,STRAIGHT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

001822: CONNECTOR,TUBING,STRAIGHT.

The CONNECTOR,TUBING,STRAIGHT is a the manufacturer industrial component. Key specifications include material: ELASTIC, overall_width: 0.129 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, overall_height: 0.149 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN, overall_length: 1.050 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN, hardness_rating: 90.0 ROCKWELL B MINIMUM AND 102.0 ROCKWELL B MAXIMUM OVERALL, special_features: BOTH ENDS TAPERED TO ACCEPT 22 MM ID CUFF TUBING MM. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-200-9227, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 001822
NSN: 5315-00-200-9227
NIINs: 002009227, 011185543, 012615916, 014317641, 015593338
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialELASTIC
overall_width0.129 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
overall_height0.149 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
overall_length1.050 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
hardness_rating90.0 ROCKWELL B MINIMUM AND 102.0 ROCKWELL B MAXIMUM OVERALL
special_featuresBOTH ENDS TAPERED TO ACCEPT 22 MM ID CUFF TUBING MM
style_designatorPLAIN
key_chamfer_angle28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM
design_designationAIRLIFE
key_chamfer_length0.104 INCHES NOMINAL IN
starting_edge_shapeCHAMFERED
electrical_resistance8.200 KILOHMS
NSN5315-00-200-9227
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 001822 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY CHAMFER ANGLE: 28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM
•
HARDNESS RATING: 90.0 ROCKWELL B MINIMUM AND 102.0 ROCKWELL B MAXIMUM OVERALL
•
STARTING EDGE SHAPE: CHAMFERED
•
STYLE DESIGNATOR: PLAIN
•
KEY CHAMFER LENGTH: 0.104 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.149 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
KEY CHAMFER ANGLE28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM
HARDNESS RATING90.0 ROCKWELL B MINIMUM AND 102.0 ROCKWELL B MAXIMUM OVERALL
STARTING EDGE SHAPECHAMFERED
STYLE DESIGNATORPLAIN
OVERALL LENGTH1.050 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
OVERALL WIDTH0.129 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
KEY CHAMFER LENGTH0.104 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
224882P002Reference document
Same NSN cross-reference
Reference document — Secondary reference
224882P2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 001822?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 001822?
001822 is a CONNECTOR,TUBING,STRAIGHT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 001822?
There are 2 known substitutes for 001822: 224882P002, 224882P2. Substitute compatibility should be verified for your specific system.
What is the NSN for 001822?
001822 is cataloged in the U.S. Government catalog under NSN 5315-00-200-9227. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 001822

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.