PartsTable
Technical Data Sheet
Download PDF

0015617 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

0015617: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include nut_style: SLEEVE, nut_length: 1.750 INCHES NOMINAL IN, nut_diameter: 1.750 INCHES NOMINAL IN, thread_class: 2B, thread_length: 1.375 INCHES NOMINAL OVERALL IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-006-9015, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0015617
NSN: 5310-01-006-9015
FSC: 5310 — Nuts and Washers
CAGE: 60882 — WALTER TRUCK CORP (USA)
SPECIFICATIONS
nut_styleSLEEVE
nut_length1.750 INCHES NOMINAL IN
nut_diameter1.750 INCHES NOMINAL IN
thread_class2B
thread_length1.375 INCHES NOMINAL OVERALL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
boss_thickness0.750 INCHES NOMINAL OVERALL IN
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL NUT
nominal_thread_size0.750 INCHES IN
cross-sectional_shapeROUND NUT
boss_width_across_flats0.875 INCHES NOMINAL IN
NSN5310-01-006-9015
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0015617 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 1.750 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD LENGTH: 1.375 INCHES NOMINAL OVERALL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT DIAMETER: 1.750 INCHES NOMINAL IN
•
BOSS THICKNESS: 0.750 INCHES NOMINAL OVERALL IN
•
BOSS WIDTH ACROSS FLATS: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
NUT LENGTH1.750 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH1.375 INCHES NOMINAL OVERALL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT DIAMETER1.750 INCHES NOMINAL IN
BOSS THICKNESS0.750 INCHES NOMINAL OVERALL IN
BOSS WIDTH ACROSS FLATS0.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND NUT
CROSS-SECTIONAL SHAPESQUARE BOSS
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
P-102397-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
102397-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0015617?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0015617?
0015617 is a NUT,SLEEVE.
What parts can replace 0015617?
There are 2 known substitutes for 0015617: P-102397-1, 102397-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 0015617?
0015617 is cataloged in the U.S. Government catalog under NSN 5310-01-006-9015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0015617

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.