PartsTable
Technical Data Sheet
Download PDF

00155-25701 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

00155-25701: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, nut_style: HEXAGON, nut_height: 0.172 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), special_features: COUNTERSUNK TO 0.170 DIAM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-514-8897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00155-25701
NSN: 5310-00-514-8897
FSC: 5310 — Nuts and Washers
CAGE: 28480 — HEWLETT-PACKARD COMPANY DBA HP (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
nut_styleHEXAGON
nut_height0.172 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
special_featuresCOUNTERSUNK TO 0.170 DIAM
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL NUT
surface_treatmentNICKEL OVERALL
width_across_flats0.312 INCHES NOMINAL IN
nominal_thread_size0.164 INCHES IN
bearing_surface_typeWASHER FACED
NSN5310-00-514-8897
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 00155-25701 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
BEARING SURFACE FINISH: 32.0 MICROINCHES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-N-290 CLASS 2,TYPE 5 FED STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT HEIGHT: 0.172 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
BEARING SURFACE FINISH32.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-N-290 CLASS 2,TYPE 5 FED STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT HEIGHT0.172 INCHES NOMINAL IN
SPECIAL FEATURESCOUNTERSUNK TO 0.170 DIAM
SURFACE TREATMENTNICKEL OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
BUWEPSDWG486444Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 00155-25701?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00155-25701?
00155-25701 is a NUT,PLAIN,HEXAGON.
What parts can replace 00155-25701?
There is 1 known substitute for 00155-25701: BUWEPSDWG486444. Substitute compatibility should be verified for your specific system.
What is the NSN for 00155-25701?
00155-25701 is cataloged in the U.S. Government catalog under NSN 5310-00-514-8897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00155-25701