PartsTable
Technical Data Sheet
Download PDF

00150-ST 16 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

00150-ST 16: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, seal_width: 1.125 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, construction: SOLID, housing_bore_diameter: 14.250 INCHES NOMINAL IN, accommodated_shaft_diameter: 12.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-138-4326, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00150-ST 16
NSN: 5330-00-138-4326
FSC: 5330 — Packing and Gasket Materials
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
seal_width1.125 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
constructionSOLID
housing_bore_diameter14.250 INCHES NOMINAL IN
accommodated_shaft_diameter12.250 INCHES NOMINAL IN
cross-sectional_shape_styleDUAL LIP
NSN5330-00-138-4326
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00150-ST 16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 1.125 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 14.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: DUAL LIP
•
ACCOMMODATED SHAFT DIAMETER: 12.250 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING SPRING
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
SEAL WIDTH1.125 INCHES NOMINAL IN
HOUSING BORE DIAMETER14.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEDUAL LIP
ACCOMMODATED SHAFT DIAMETER12.250 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING SPRING
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
15355LDSReference document
Same NSN cross-reference
Reference document — Secondary reference
15355LDSH1L5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 00150-ST 16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00150-ST 16?
00150-ST 16 is a SEAL,PLAIN.
What parts can replace 00150-ST 16?
There are 2 known substitutes for 00150-ST 16: 15355LDS, 15355LDSH1L5. Substitute compatibility should be verified for your specific system.
What is the NSN for 00150-ST 16?
00150-ST 16 is cataloged in the U.S. Government catalog under NSN 5330-00-138-4326. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00150-ST 16