PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00150 STYLE 8
00150 STYLE 8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, seal_width: 0.187 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, construction: SOLID, housing_bore_diameter: 1.247 INCHES NOMINAL IN, accommodated_shaft_diameter: 1.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-078-8958, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00150 STYLE 8
NSN: 5330-00-078-8958
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
seal_width0.187 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
constructionSOLID
housing_bore_diameter1.247 INCHES NOMINAL IN
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-078-8958
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00150 STYLE 8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
CONSTRUCTION: SOLID
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
HOUSING BORE DIAMETER: 0.875 INCHES NOMINAL IN
•
SEAL WIDTH: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER0.625 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
HOUSING BORE DIAMETER0.875 INCHES NOMINAL IN
SEAL WIDTH0.093 INCHES NOMINAL IN
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
63-160Interchangeable
interchangeable cross-reference
interchangeable
B107.6 TY1Interchangeable
interchangeable cross-reference
interchangeable
AS954 TY2CL4STCInterchangeable
interchangeable cross-reference
interchangeable
63098Interchangeable
interchangeable cross-reference
interchangeable
00150 STYLE 8Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-2692Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00150 STYLE 8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00150 STYLE 8?
00150 STYLE 8 is a SEAL,PLAIN.
What parts can replace 00150 STYLE 8?
There are 12 known substitutes for 00150 STYLE 8: 63-160, B107.6 TY1, AS954 TY2CL4STC and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00150 STYLE 8?
00150 STYLE 8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-078-8958. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00150 STYLE 8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026