PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00150 STYLE 18
00150 STYLE 18 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, housing_bore_diameter: 2.000 INCHES NOMINAL IN, accommodated_shaft_diameter: 1.125 INCHES NOMINAL IN, cross-sectional_shape_style: DUAL LIP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-603-2030, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00150 STYLE 18
NSN: 5330-00-603-2030
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
seal_width0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
housing_bore_diameter2.000 INCHES NOMINAL IN
accommodated_shaft_diameter1.125 INCHES NOMINAL IN
cross-sectional_shape_styleDUAL LIP
NSN5330-00-603-2030
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00150 STYLE 18 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: DUAL LIP
•
HOUSING BORE DIAMETER: 2.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEDUAL LIP
HOUSING BORE DIAMETER2.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
917HDInterchangeable
interchangeable cross-reference
interchangeable
D21105Interchangeable
interchangeable cross-reference
interchangeable
A15490Interchangeable
interchangeable cross-reference
interchangeable
64324Interchangeable
interchangeable cross-reference
interchangeable
64324BInterchangeable
interchangeable cross-reference
interchangeable
528927-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00150 STYLE 18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00150 STYLE 18?
00150 STYLE 18 is a SEAL,PLAIN.
What parts can replace 00150 STYLE 18?
There are 8 known substitutes for 00150 STYLE 18: 917HD, D21105, A15490 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00150 STYLE 18?
00150 STYLE 18 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-603-2030. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00150 STYLE 18

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026