PartsTable
Technical Data Sheet
Download PDF

00150 STYLE 11 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

00150 STYLE 11: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC SEALING ELEMENT, seal_width: 0.438 INCHES NOMINAL IN, construction: SOLID, housing_bore_diameter: 2.625 INCHES NOMINAL IN, accommodated_shaft_diameter: 1.750 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-726-1630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00150 STYLE 11
NSN: 5330-00-726-1630
NIINs: 007261630, 009650806
FSC: 5330 — Packing and Gasket Materials
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER SYNTHETIC SEALING ELEMENT
seal_width0.438 INCHES NOMINAL IN
constructionSOLID
housing_bore_diameter2.625 INCHES NOMINAL IN
accommodated_shaft_diameter1.750 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-726-1630
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00150 STYLE 11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL SPRING
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.312 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.625 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
MATERIALSTEEL SPRING
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 1
9339 LPD H1/L5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 00150 STYLE 11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00150 STYLE 11?
00150 STYLE 11 is a SEAL,PLAIN.
What parts can replace 00150 STYLE 11?
There is 1 known substitute for 00150 STYLE 11: 9339 LPD H1/L5. Substitute compatibility should be verified for your specific system.
What is the NSN for 00150 STYLE 11?
00150 STYLE 11 is cataloged in the U.S. Government catalog under NSN 5330-00-726-1630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00150 STYLE 11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.