PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0015-00423
0015-00423 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 2.562 INCHES NOMINAL IN, aperture_diameter: 1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, cross-sectional_thickness: 0.094 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-074-3866, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0015-00423
NSN: 5330-01-074-3866
FSC: 5330
CAGE: 09393 — ROCHESTER SENSORS, LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter2.562 INCHES NOMINAL IN
special_features5 HOLES 0.136 IN. DIA MIN,0.171 IN. DIA MAX LOCATED ON 2.125 IN. DIA BOLT HOLE CIRCLE,1 PILOT HOLE 0.062 IN. DIA LOCATED ON 2.312 IN. DIA BOLT HOLE CIRCLE IN
aperture_diameter1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
cross-sectional_thickness0.094 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classification823,FSCM 91265 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-074-3866
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0015-00423 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 823,FSCM 91265 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.094 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.562 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
HARDNESS RATING50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
SPECIAL FEATURES5 HOLES 0.136 IN. DIA MIN,0.171 IN. DIA MAX LOCATED ON 2.125 IN. DIA BOLT HOLE CIRCLE,1 PILOT HOLE 0.062 IN. DIA LOCATED ON 2.312 IN. DIA BOLT HOLE CIRCLE IN
MATERIAL DOCUMENT AND CLASSIFICATION823,FSCM 91265 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL THICKNESS0.094 INCHES NOMINAL IN
OUTSIDE DIAMETER2.562 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
15430 SET 2Interchangeable
interchangeable cross-reference
interchangeable
5133173Interchangeable
interchangeable cross-reference
interchangeable
15423Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 41Interchangeable
interchangeable cross-reference
interchangeable
C41615Interchangeable
interchangeable cross-reference
interchangeable
41615Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0015-00423?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0015-00423?
0015-00423 is a GASKET.
What parts can replace 0015-00423?
There are 8 known substitutes for 0015-00423: 15430 SET 2, 5133173, 15423 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0015-00423?
0015-00423 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-074-3866. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0015-00423

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026