PartsTable
Technical Data Sheet
Download PDF

00137211 — GASKET,SPIRAL WOUND

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

00137211: GASKET,SPIRAL WOUND.

- For connecting up to seven electrical devices via 5 sockets with earth contact and 2 USB outputs - 5 sockets with earth contact - Sockets angled at 45° - 2 integrated universal USB charging sockets - Thanks to the high charging current also suitable for tablet PCs - Non-illuminated 2-pin switch - With child protection This part is cataloged in the U.S. Government catalog under NSN 5330-01-297-7574, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00137211
NSN: 5330-01-297-7574
NIINs: 012977574, 015071148
FSC: 5330 — Packing and Gasket Materials
CAGE: 58156 — FLEXITALLIC US, LLC (USA)
SPECIFICATIONS
outside_diameter1.844 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASBESTOS MATERIALS
style_designatorCIRCULAR
aperture_diameter1.906 INCHES NOMINAL IN
cross-sectional_thickness0.061 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL WINDING W/ SOFT FILLER
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-297-7574
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00137211 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.061 INCHES MINIMUM AND 0.061 INCHES MINIMUM AND 0.068 INCHES MAXIMUM0.068 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL WINDING W/ SOFT FILLERMETAL WINDING W/ SOFT FILLER
•
OUTSIDE DIAMETER: 1.844 INCHES MINIMUM AND 1.844 INCHES MINIMUM AND 1.906 INCHES MAXIMUM1.906 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.359 INCHES MINIMUM AND 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM1.391 INCHES MAXIMUM IN
•
MATERIAL: CHLORITE AND STEEL COMP 304 SPIRAL WOUND FILLER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.061 INCHES MINIMUM AND 0.061 INCHES MINIMUM AND 0.068 INCHES MAXIMUM0.068 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL WINDING W/ SOFT FILLERMETAL WINDING W/ SOFT FILLER
OUTSIDE DIAMETER1.844 INCHES MINIMUM AND 1.844 INCHES MINIMUM AND 1.906 INCHES MAXIMUM1.906 INCHES MAXIMUM IN
APERTURE DIAMETER1.359 INCHES MINIMUM AND 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM1.391 INCHES MAXIMUM IN
SPECIAL FEATURESASBESTOS FREEASBESTOS FREE
MATERIALCHLORITE AND STEEL COMP 304 SPIRAL WOUND FILLER
SUBSTITUTES & CROSS-REFERENCES 1
625017-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 00137211?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00137211?
00137211 is a GASKET,SPIRAL WOUND manufactured by Hama.
What parts can replace 00137211?
There is 1 known substitute for 00137211: 625017-4. Substitute compatibility should be verified for your specific system.
What is the NSN for 00137211?
00137211 is cataloged in the U.S. Government catalog under NSN 5330-01-297-7574. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00137211

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.