PartsTable / COMPONENT / 00110000
00110000
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, outside_diameter: 1.062 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.755 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, cross-sectional_thickness: 0.039 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-532-3546, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
00110000
NSN: 5330-00-532-3546 FSC: 5330 CAGE: 63734 — KAITLIN CORP (USA)
SPECIFICATIONS
material PAPER OVERALL outside_diameter 1.062 INCHES NOMINAL IN style_designator CIRCULAR aperture_diameter 0.755 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN cross-sectional_thickness 0.039 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION material_document_and_classification MIL-G-12803,F112600E56-6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL NSN 5330-00-532-3546
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 00110000
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 1.062 INCHES NOMINAL IN
• STYLE DESIGNATOR: CIRCULAR
• CROSS-SECTIONAL THICKNESS: 0.039 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
• APERTURE DIAMETER: 0.755 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,F112600E56-6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 1.062 INCHES NOMINAL IN STYLE DESIGNATOR CIRCULAR CROSS-SECTIONAL THICKNESS 0.039 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN APERTURE DIAMETER 0.755 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION MATERIAL DOCUMENT AND CLASSIFICATION MIL-G-12803,F112600E56-6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL MATERIAL PAPER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
TP314 Interchangeable interchangeable cross-reference
interchangeable
11581 Interchangeable interchangeable cross-reference
interchangeable
FF-W-92B Interchangeable interchangeable cross-reference
interchangeable
A12056 Interchangeable interchangeable cross-reference
interchangeable
G8T13532 Interchangeable interchangeable cross-reference
interchangeable
265866015 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 00110000?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00110000?
00110000 is a GASKET.
What parts can replace 00110000?
There are 22 known substitutes for 00110000: TP314, 11581, FF-W-92B and 19 more. Substitute compatibility should be verified for your specific system.
Is 00110000 still available?
00110000 is currently cancelled.
Request a Quote — 00110000