PartsTable
Technical Data Sheet
PartsTable / MRO / 00100
00100 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The LENS,HELMET,WELDER'S is a the manufacturer industrial component. Key specifications include end_item_identification: OTHER CMDS' SYSTEMS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-530-9221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 00100
NSN: 5305-00-530-9221
FSC: 5305
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
end_item_identificationOTHER CMDS' SYSTEMS
NSN5305-00-530-9221
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 00100 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 20
•
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE
•
HEAD HOLE CONFIGURATION STYLE: HEXAGON FLATS
•
THREAD LENGTH: 0.500 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH20
SCREW MATERIALSTEEL COMP 303 OR STEEL COMP 303SE
HEAD HOLE CONFIGURATION STYLEHEXAGON FLATS
THREAD LENGTH0.500 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD HEIGHT0.188 INCHES NOMINAL IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
F706Interchangeable
Helmet,welder's
interchangeable
GGG-H-211Interchangeable
Helmet,welder's
interchangeable
ANSI Z87.1Interchangeable
Helmet,welder's
interchangeable
00100Interchangeable
interchangeable cross-reference
interchangeable
GPDC0H100KInterchangeable
interchangeable cross-reference
interchangeable
DD100Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00100?
00100 is a LENS,HELMET,WELDER'S. It is classified as a MRO (MRO_GENERAL).
What parts can replace 00100?
There are 11 known substitutes for 00100: F706, GGG-H-211, ANSI Z87.1 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00100?
00100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-530-9221. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026